SZG Double Conical Revolving Vacuum Dryer is double conical rotating cylinder. Under the s...
More
Detailed description
SZG Double Conical Revolving Vacuum Dryer
Description
SZG Double Conical Revolving Vacuum Dryer is double conical rotating cylinder. Under the state of vacuum in the cylinder, pass oil or hot water into the jacket to heat. The heat will be connected with damp raw material through inner wall. The evaporated steam after the raw material absorbed heat will be exhausted through vacuum pump. Because the inner of cylinder is in vacuum state and the cylinder make raw material turn over from up to down and from inner to outer, the drying speed is fastened and the drying efficiency is raised, and the purpose of uniform dry can be reached, It is in conformity with the GMP requirement.
Features
1、 Due to the vacuum drying, the speed rate is higher under low temperature, it can triple the normal speed, so the energy saving and high heat efficiency can be achieved .This machine is most suitable for heat sensitive materials and materials that are easy to oxidize.
2、 The equipment adapt advance design, the inner structure is simple, clean easy, material can be taken out entirely, and operate simple.
3、 The dryer is sealed, the product doesn't lead, damage and pollute This machine is suitable for drying stimulating and poisonous materials.
Because the materials are dried by mixing drying, the product can has very low water content (≤0.5%) and good uniformity. It can meet different materials’ requirements.
4、 The machine has a very compact structure, and it covers a small area. so it’s easy to achieve labor intensity-reducing and labor-saving due to the simple operation.
5、 Users can choose stepless regulating-speed(1-10r/m)or regulating- speed (6-10r/m)
sketch map
Technical Parameters
100
350
500
750
1000
1500
2000
3500
4500
volume inside the tank(L)
100
350
500
750
1000
1500
2000
3500
4500
loading capacity(L)
≤50
≤175
≤250
≤375
≤500
≤750
≤1000
≤1750
≤2250
rotating speed(rpm)
3~13
power of motor(kw)
0.75
1.1
1.5
2
3
3
4
5.5
7.5
occupied area
L×W(mm)
2160×800
2260×800
2350×800
2560×1000
2860×1300
3060×1300
3260×1400
3760×1800
3960×2000
rotating height(h)
1750
2100
2250
2490
2800
2940
2990
3490
4100
design pressure inside the tank(MPa)
-0.1~0.15
design pressure of jacket(MPa)
≤0.3
working temperature(℃)
inside the tank≤85 jacket≤140
pump type and power when t condenser is not used(kw)
Address:Jiangyin City, Harbor City Industrial Park, the new groove>
Tel:0086-510-81662226 81662210
Fax:0086-510-81662230
Contacts:Cao yunhua General manager
Copyright:Jiangyin ZhuoYing Drying Engineering Co., Ltd. Technical support:Yun ji suan